Marine Electronics World

Powerhouse 1HP Ice Eater

The Ice Eater is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.
Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation.
Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing patern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in.
Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

1 HP energy efficient high quality motor
115 volt, 7.0 amps, one phase, 60/50 cycle
25 foot quick change power cord
Two 25 foot x 3/8" hollow braided mooring lines with shackles
Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8"
Shipping weight 45 lbs
For large boats, marinas and heavier uses
Can be used in place of several smaller units
Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
Motor shaft is 316 stainless steel, the best material for salt water application
Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
Stator motor windings have double impregnation of baked insulating varnish
Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
Performance certified tested at our facility for proper output and leaks before shipment
Best three year limited warranty in the marketplace
Comes complete, just open the box, remove and install
Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

Powerhouse 1/2HP Ice Eater

1/2 H.P. energy efficient high quality motor with 28 pounds thrust
5.0 amps, 115 volt, one phase, 60/50 cycle
25 foot quick change power cord
Two 25 foot x 3/8 hollow braided mooring lines with shackles
Dimensions of shipping box 12 5/8 x 12 5/8 x 12 3/4
Weight 36 pounds
Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
Motor shaft is 316 stainless steel, the best material for salt water application
Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
Stator motor windings have double impregnation of baked insulating varnish
Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
Performance certified tested at our facility for proper output and leaks before shipment
Best three year limited warranty in the marketplace
Comes complete, just open the box, remove and install
Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application

Powerhouse 3/4HP Ice Eater

3/4 H.P. energy efficient high quality motor with 36 pounds thrust
4.7 amps, 115 volt, one phase, 60/50 cycle
25 foot quick change power cord
Two 25 foot x 3/8 hollow braided mooring lines with shackles
Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
Weight 45 pounds
Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
Motor shaft is 316 stainless steel, the best material for salt water application
Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
Stator motor windings have double impregnation of baked insulating varnish
Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
Performance certified tested at our facility for proper output and leaks before shipment
Best three-year limited warranty in the marketplace
Comes complete, just open the box, remove and install
Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application

Powerhouse Screen Kit

SCREEN ACCESSORY KIT

Helps prevent debris damage. Can be used on bottom or top or both as needed by area conditions.

Works with P750 & P1000

Powerhouse 80000 Replacement Propeller

SPARE PROPELLER

Custom designed propeller molded out of nylon for strength. Propeller screws on motor shaft.

Works with all Models