Marine Electronics World > Marine Navigation & Equipment > Marine Network Accessories

Humminbird AS-BP Weathersense Barometric Pressure Sensor

Barometric Pressure Monitor

Access advanced barometric pressure capability of your Fishing System to refine your fishing tactics to changing weather conditions. WeatherSense Fishing Condition Monitor tracks barometric pressure in real time and displays the information on your Matrix Fishing System unit. See increasing or decreasing barometer trend and digital readout on your sonar screen.

Key Features:
All Humminbird Fishing Systems are ready to connect to WeatherSense Fishing Condition Monitor so you can adapt your tactics to changing weather that impacts fish. WeatherSense provides increasing or decreasing barometer trends on a full screen view or as a digital readout on your sonar screen if you choose. Plus, WeatherSense internal battery and smart monitoring system always logs the last 12 hours of the barometric pressure, so you'll start the day with an accurate, up-to-date trend information.

Pros know changing weather conditions impact fish behavior! It is a known fact that right before a major weather front, the barometer falls rapidly, causing most fish and game to become quite active, which generally enhances their feeding instincts. The opposite occurs behind the front. Fish turn dormant, often burying themselves into the densest cover. Catching fish under these conditions requires totally different techniques than under normal conditions. Anglers who understand these conditions will be the most successful.

Furuno 6 Pin NMEA Cable

FURUNO 6 PIN NMEA CABLE (OLD 000-117-603)

Raymarine PC/NMEA/SeaTalk Interface Box

PC/NMEA/SeaTalk Interface Box

Converts signals between SeaTalk, NMEA 0183, and RS232 formats.

Converts signals between SeaTalk, NMEA 0183, and RS232 formats. Enables RayTech navigation software to converse in SeaTalk with compatible devices. Can be used to host PCs running NMEA based navigation software on a SeaTalk network. Also supports auxil

Humminbird CannonLink Downrigger Controller

CannonLink Downrigger Controller

The CannonLink System Module enables any Fishing System to control the operation of up to 6 Cannon Mag20 DT and the Mag20 DT/HS downriggers.

Key Features:
The CannonLink System Module enables any Fishing System to control the operation of up to 6 Cannon Mag20 DT and the Mag20 DT/HS downriggers. Through an intuitive menu controlled from the Fishing System, the user can quickly set-up and update settings that operate the downriggers. When fishing short-handed on the boat, the CannonLink module enables the captain to easily operate the downriggers from the console, while the mate tends to the rigging lines.

Benefits

Automatically deploy or retrieve downriggers directly from any Fishing System.
Set the downrigger operation mode to Manual for complete control, Bottom Track to maintain distance off the bottom or Cycle to continuously move the downriggers between two depths.
Monitor the downrigger depth and operation graphically on-screen combined with the sonar graph.
View temperature at depth, speed-through-water and water clarity on the Fishing System screen when using the Cannon Speed-NTemp Sensor.
Simultaneously, or individually control up to 6 Cannon Mag20 DT and the Mag20 DT/HS downriggers.

Applications

By viewing sonar, temperature at depth and clarity information on screen while piloting the boat, the Captain can monitor and position downriggers in real-time to the optimal depth to vastly increase the catch.

Humminbird InterLink Network Connection

InterLink Network Connection

The InterLink System Module networks two Fishing System models together enabling GPS and other accessory data to be shared between the units. The ability to display critical fishing and navigation data on both displays provides time-saving convenience for the user.

Key Features
Benefits

Networks two Fishing Systems and System Modules together.
Enables one GPS receiver to be shared between 2 units - GPS receiver plugs into InterLink module.
Saves all waypoints and routes within the internal memory of InterLink module for safe keeping.
Shares digital information for: Current Position, Speed Over Ground, Course Over Ground, Water Temperature, Auxiliary (livewell) Temperature, Depth, Barometric Pressure, Downrigger Status

Note: Only digital information is shared - graphical sonar or charts/map information NOT shared. Data from the Wireless Sonar Link is not shared between units, but can be viewed on one unit.

Applications:

Boats rigged with two units (bow & console, or helm & flybridge) can share same waypoints, routes and current track.
When using the console unit to navigate to a waypoint, will automatically see the waypoint and route appear on the bow unit as they use the trolling motor to close in on the final distance.
Larger boats rigged at the console with dual screens (separate chartplotter and fishfinder) can use the GPS capabilities of fishfinder tomark sonar structure, and see the waypoints on both the fishfinder and chartplotter.

Raymarine Pathfinder Smart Heading Sensor

Pathfinder Smart Heading Sensor

Gyro Stabilized fluxgate compass system, specifically designed for use with the Pathfinder Plus range of radars and chartplotters.

For optimum performance with the Pathfinder Plus range of Radar and Raychart displays. The Pathfinder Smart Heading Sensor delivers the same gyro stabilized heading information provided by our Autohelm Series 150G and 400G autopilot Corepacks.

Features:

Provides fast, stable and accurate heading data over NMEA 0183
Significantly improves stability of radar/chart overlay
Significantly improves performance of MARPA. Improves target acquisition, retention and calculation of target tracking data, especially when conditions deteriorate.
Easy to install, and set up
Easy to calibrate using soft keys and menu on Pathfinder Plus screen
Easy compass alignment to COG
Improves autopilot performance

Furuno PB 100 Ultrasonic Weather Station Sensor for RD-30

PB 100

Updated vessel weather information is an essential part of the boating experience. Furuno has joined forces with Airmar to bring you the Ultimate Weather Station. With our Ultimate Weather Station, you have your own personal weatherman on-board the boat 24 hours a day, 7 days a week!

The PB100 has no moving parts to ensure reliable operation. Information from the PB100 is output as NMEA0183 data and can be sent to a number of devices, such as a PC, Chart Plotter or RD30 NMEA Data Repeater. An optional NMEA data combiner is available to mix data from multiple sources and send combined data to multiple devices.

By combining Furunos popular RD30 Nav Data Repeater with the PB100 Weather Station, you can now display important weather information in a large, easy-to-read format. As an added bonus, the PB100 has been fitted with an internal compass as well as a state-of-the-art Furuno GPS sensor, allowing you to utilize the PB100 as a backup GPS navigator.

Standard Features:

Measures apparent and true wind speed and direction without any moving parts
Measures Barometric Pressure, Air and Wind Chill Temperature, Relative Humidity, Dew Point Temperature, GPS Lat/Lon, Pitch/Roll and Heading
Continuous operation in adverse weather conditions
Standard 1" mount accommodates existing mounting hardware
Quick disconnect for easy removal
NMEA0183 compatible
Internal Furuno GPS sensor standard allows for use as a backup GPS sensor
Internal compass standard for true wind speed and direction computation
Plug and Play compatibility with Furuno RD30 - standard 15 meter cable with RD30 connector powers PB100 from RD30
Optional combiner interface allows PB100 to be displayed simultaneously on both the RD30 and a PC

Data Ouput Protocol:

$WIMWV - Wind Speed/Angle
$WIMWD - Wind Direction/Speed
$WIMDA - Meteorological Composite
$WIXDR - Wind Chill Temperature
$GPGGA - GPS Fix Data
$GPGLL - Geographic Position (Lat/Lon)
$GPRMC - Recommended Minimum GNSS
$GPVTG - COG and SOG
$HCHDG - Heading, Deviation, Variation

Power Use:

10-16 VDC

Garmin GMS 10 Network Port Expander

The GMS 10 Network Port Expander is the "nerve center" of the Garmin Marine Network. This 100-Mbit switch is designed to support the connection of multiple sensors and the GPSMAP 3006C and GPSMAP 3010C chartplotters/multifunction displays (MFDs) to the Garmin Marine Network. The GMS 10 allows users to gain the benefit of Ethernet-like data transfer speeds up to 10 times faster than some competitive systems.

Each networked MFD can be configured independently, and the connections are completely waterproof for operation in corrosive marine environments. The switch has LED indicators for individual line status. Plug-and-play design means that all peripherals are automatically detected and readily accessible once they're connected to the network. Likewise, owners can easily expand their systems by using the same standard data cable to plug additional units and displays into the GMS 10 network ports.

Features of both the GMS 10 Network Port Expander and the Garmin Marine Network:

Completely plug-n-play (automatically detects unit at connection)
100 Mbit Garmin-proprietary network
Totally waterproof connections
Same network cable for direct unit-to-unit or unit-to-port expander
Meets rigid IEC 60529 IPX7 submersible standards