Katadyn Powersurvivor-80E

PowerSurvivor-80E

The rugged model 80E produces over 3 gallons per hour. Best of all, it is both easy to maintain and efficient, drawing only 8 amps.

Simplicity - The 80E is remarkable for its simplicity. As a result you can perform periodic maintenance with a few common tools and easy to follow instructions.

Compactness - Relative to its output, the 80E is extraordinarily compact. For those with fewer space constraints, the 80E is offered in an attractive vibration-dampening enclosed variation.

Efficiency - With the patented Energy Recovery System, the 80E produces volumes of water at a fraction of the energy used by conventional watermakers.

Durability - The 80E uses 316 stainless steel for pump housings. As with all of our models, they are covered by the best warranty in the business: 3 years on most components.

Specifications

The PowerSurvivor-80E delivers 3.4 gallons per hour. It is available in two variations: Modular and Enclosed.

Power Requirements:
12 volts DC (draws 8 amps)/24 volt DC (draws 5 amps)

Water Production (+/- 15%):
3.4 gallons/hour (12.9 liters/hour)

Weight:

Modular: 34 lbs (15.4 kg)

Enclosed: 49 lbs (22.2 kg)

Dimensions (Modular):

Pump:

Height: 6" (15.2 cm)

Length: 16" (40.6 cm)

Width: 14" (35.6 cm)

Membrane Module:

Length: 31" (78.7 cm)

Diameter: 2.5" (6.4 cm)

Dimensions (Enclosed) :

Pump:

Height: 9.3" (23.6 cm)

Length: 20.8" (52.8 cm)

Width: 17" (43.2 cm)

Prefilter Module:

Length: 12" (30.5 cm)

Diameter: 6" (15.2 cm) (allow 7" (18 cm) for hose bend)

Feedwater Flow Rate:
34 gallons/hour (128.7 liters/hour)

Salt Rejection:
98.4% average (96% minimum)

Hand-held Salinity/TDS Meter:
Standard

Katadyn Powersurvivor-40E, Durable 12-volt watermaker

This compact, highly durable 12-volt watermaker is our contribution to improving life on board. It is the smallest and least expensive power watermaker available.

Simplicity - The 40E contains 40% fewer parts than its popular predecessor, the PowerSurvivor-35. Simplified construction and rugged design make the 40E remarkably easy to install, operate and maintain.

Compactness - Extraordinarily compact, the 40E can be installed in the nooks and crannies otherwise unusable in many yachts.

Efficiency - No watermaker draws so few amps. Using only 4 amps, the 40E can run for extended periods on alternative power alone.

Durability - The heart of the 40E is the rugged stainless high-pressure pump. Armed for the rigors of the marine environment, this watermaker is built to last. We're so certain, we've covered it with a superior warranty: 3 years on most components.

Specifications

The PowerSurvivor-40E delivers 1.5 gallons per hour. It is the only power watermaker that converts to manual operation in emergencies.

Power Requirements:

12 volts DC (draws 4 amps)/24 volts DC (draws 3 amps)

Water Production (+/- 15%):

1.5 gallons/hour (5.7 liters/hr)

Weight:

25 lbs (11.33 kg)

Dimensions - Pump :

Height: 6.75" (17.2 cm)

Length: 16.5" (41.9 cm)

Width: 15.5" (39.4 cm)

Dimension - Prefilter Module:

Length: 12" (30.5 cm)

Diameter: 6" (15.2 cm) (allow 7"(18 cm) for hose bend)

Feed water Flow Rate:
20 gallons/hour (75.7 liters/hour)

Salt Rejection:
98.4% average (96% minimum)

Marine Electronics World > Marine Safety > Watermakers

Katadyn Powersurvivor-80E

Katadyn Powersurvivor-40E, Durable 12-volt watermaker